top of page


Anker 1

The control wheel is located behind the nozzle groups which are fitted into the nozzle chest. Rotor blades with root and shroud band are milled from the solid.

The control wheel blades are highly dynamically loaded, in particular at partial admission. A rolled in wire serves as a damping element for possible vibrations. The following over-pressure rotor blades are equipped with an integrated shroud band. Both the last stages of the condensing turbines are standardized as free-standing twisted blades without a shroud band, which are connected by a so called damping wire. Depending on the specific load situation the blade roots have different shapes as finger, hammer, or fire-tree. All blades are made from 13% chromium steel. Guide blades are fitted into the guide blade carrier.

Each row is equipped with an integral or a riveted shroud band.


Am Flachmoor 6
90475 Nuremberg


Phone: +49 911 239568-710

We offer all employees as well as persons who are or have been in contact with us due to their professional activities an internal reporting office at the aforementioned email address where grievances, violations or suspicious facts can be reported. TGM Kanis treats all incoming information confidentially and does not tolerate any reprisals against whistleblowers who report possible violations in good faith and responsibly.

bottom of page